AC Nitro 200 Magnesium Delta

The New NITRO Revolution 200 Motor :

The Air Conception Nitro mounted in a lower cost Mag aluminium frame. Exact same specs of the Race frame, with a slightly higher weight (19.9kg) but less durability than the titanium frame

The aluminum DELTA chassis is made of high grade T6 aluminum.

This chassis is made of high grade T6 aluminum. This special design of the DELTA makes it possible to improve the aerodynamics and position the tank as far as possible from the propeller.

The Race frame is also available as " split" where the frame breaks in two for easier transportation

The Standard cage of the DELTA is produced in 55 inches (140 cm) of diameter, perfectly protecting the 49 inch propeller (125 cm).

It is also available in a 150 cm cage and 140 cm prop and offers more thrust and better economy

The XL nitro is a 165cms 150cms prop (The Nitro XL is not supplied with frame bag and prop covers) and gives extreme power and excellent economy.

REVOLUTION 200

- 6 kg (13 lbs) more thrust than NITRO 200
- Warranty extended to 3 years
- Ultra smooth and linear power band without any surging at middle range
- Very low vibration level
- Steel/steel long life clutch system
- Innovative new decompression system (pull and dual start versions)
- Long life silicon mounts

Available in 3 versions:

- Manual starter & clutch: 11.95 kg - Complete paramotor starting at 19,1 kg – 42,2 lbs
- Electric starter & clutch: 12.6 kg
- Pull starter & electric starter & clutch: 12.9 kg
 

Using 6x removable 4K carbon tubes in construction the 4 section frame disassembled within a few seconds to a very compact size.

 Standard Harness:

• Made by Sup’Air.
• Designed for Air Conception.
• Polymide 420D Ripstop.
• Slim self locking buckles.
• Removable side pockets.
• Optional side rescue pod.
• Internal hip speedbar pulley.
• Seat extension adjustment.
• Thick padded shoulder straps.
• Carbon fiber seat base.
• Breathable fabric in key areas.
• Reserve connection points.

Apco Split leg harness

Propeller

• 2pc Carbon Fiber E-prop
• 125cm or XL 150cm*
• High aspect ratio.
• Continuos carbon wrapped braided fibers.
• Honeycomb core.
• Internal strengthening spar.
• NanoStrength leading edge.
• RTM manufactured.

Specially designed for demanding pilots who are looking for a consistent and smooth power band and a low level of noise , this 192 cc Paramotor engine is today the most powerful and lightest engine in its category with a real total weight of just (11.95 kg)

Air Conception Nitro 200 Engine cooling test results:

Air Conception Nitro 200 Thrust test results:

• 79.4kg thrust with 125cm propeller
• 81.4kg with 130cm propeller
• Up to 86kg thrust with our new 65 inches (150 cm) propeller

Engine Specifications:

• 192cc. 2 Stroke. 40:1 synthetic oil
• 28hp @ 7800 rpm. 
• 1:2.7 belt drive. 
• Nylock long life pull start.
• 25.3 lbs (11.5 kg) engine with steel exhaust.
• Double compression joint exhaust.
• Exhaust has built-in dB reduction.
• Carbon fibre silencer.
• Advanced internal & external engine cooling.
• Anti-slip long belt life technology.
• All bolts thread locked and position marked.
• Tuned for linear throttle response.
• 2 year AC parts warranty.

• Chassis Size when folded away Nitro QR arms
  Height 93cm
  Depth 34cm
  Width 50cm